ASTM A240 UNS N08800 Incoloy 800 800H 800HT W.Nr.1.4876 plate sheet
strip
1. Incoloy 800 Plate, Incoloy 800H Plate, and Incoloy 800HT Plate
Are nickel-iron-chromium alloys with good strength and excellent
resistance to oxidation and carburization in high-temperature
exposure. The chemical composition of the two alloys areidentical
to Alloy 800 Plate (UNS N08800), with the exception of the higher
level of carbon present in both grades - (0.05 - 0.10%) in alloy
800H, and(0.06 - 0.10%) in Alloy 800HT Plate. Incoloy 800ht Plate
also has an addition of up 1.0% aluminum and titanium. Alloy 800
Coil has good creep-rupture properties at temperatures above 1100°F
(600°C).
The high temperature resistance of Incoloy 800 Strip is comparable
to Inconel 800h Plate. It also remains stable in long term high
temperature service. The tight chemistry control and solution
annealing heat treatment were designed to provide optimum creep and
rupture properties for Incoloy 800h Plate and ASTM B409 UNS N08811.
Inconel 800 Plate can be cold formed by standards methods.
Incoloy 800 Clad Plate is also known as Nicrofer 3220, Nicrimphy
800, and Pyromet 800. Looking for best price of Alloy 800 Plate in
China? We have no minimum footage requirements. We will supply the
exact amount of Incoloy 800 Shim you require even if it’s small
quantity of Incoloy 800 Strip. Contact Steel Tubes China- the right
supplier of Incoloy 800ht Plate near you.
Steel Tubes China offers one of the widest ranges of ASTM B409 UNS
N08800 in various qualities, sizes and grades which are equivalent
to Incoloy 800 Plate (2mm to 12mm). Incoloy 800 Sheet is available
in thicknesses ranging from .016 to .156". Large size Incoloy 800
plate will also diminish the size of the undesirable heat-affected
zone caused by welding. We also stock & supply extra large-size
Incoloy 800 Sheets, thin and ultra-thin gauge Incoloy Alloy 800
strip and foil products, rolled down to 2 microns.
Superior technology as well as extensive quality control from
steelmaking to finishing assure the stable production of Incoloy
800 Hot Rolled Plates in uniformly of excellent quality. We apply
the process of surface finishing to our Incoloy 800 Polished Plate
by pickling or buff-polishing. Incoloy 800 Strips levels of
finishing & cut can be adjusted according to your requirements.
Incoloy 800 Plate is available in the form of Sheet, Coils, Foils,
Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling
Sheet, Flat Sheet, Rolling Plate and Flat Shim. The Incoloy 800
Plate Weight Calculator allows you to calculate an estimate of the
weight of different sizes of Incoloy 800 plates based on dimensions
and shape.
2. Our Dealers & Distributors
in UK, USA, Sweden, Israel, Germany, Russia, France, Italy, Canada,
UAE, Saudi Arabia, Malaysia, Singapore, Oman, Kuwait, Qatar, Iran,
Indonesia & Australia arrange complete range of Incoloy 800 plates
in shortest time as well at best price, because we maintain Incoloy
800 Sheet in stock for sale, so it saves time & cost to procure any
size range in Bright annealed Incoloy 800 sheet from any other
vendor or Manufacturer of mirror finish Incoloy 800 plate in China.
3. Incoloy 800 Sheet Price in China
| Incoloy 800/H/HT Plate Price | Origin | Price in INR
(per kg) | Price in USD
(per kg) | Price in Euro
(per kg) | Others |
| Incoloy 800/H/HT Plate Price in China | Chinan | Rs 1200/- | $17 | €14 | Cut to Size |
| Incoloy 800/H/HT Plate Price in Japan | Japanese | Rs 1400/- | $21 | €18 | Fix Length |
| Incoloy 800/H/HT Plate Price in UK / Europe | European | Rs 1500/- | $22 | €19 | Fix Length |
| Incoloy 800/H/HT Plate Price in USA | USA | Rs 1600/- | $24 | €20 | Fix Length |
Please note: Price is subject to change without any prior notice.
4. Incoloy 800/800H/800HT Sheet, Plate ASTM Specifications
| Alloy | Sheet / Plate |
| Alloy 800 (UNS N08800) | B409 |
| Alloy 800H (UNS N08810) | B409 |
| Alloy 800HT (UNS N08811) | B409 |
| Incoloy 800 Plate ASTM Specification | ASTM B409 UNS N08800, ASME SB409, ASTM B409 UNS N08810, ASTM B409
UNS N08811 |
| Alloy 800 Plate Specification | MSRR, AMS, BS, ASTM B409 / ASME SB409 |
| Incoloy 800 Plate Length & Sizes | 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x
3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm,
1500 mm x 3000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", Cut to
size available |
| Incoloy 800 Plate Thickness | 0.1mm to 100 mm Thk |
| Incoloy 800 Plate Width | 10-2500mm |
| Incoloy 800 Plate AMS | AMS 5871 |
| Incoloy 800 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Temper | Annealed |
| Condition | Polished on both sides |
| Incoloy 800 Plate Finish | Hot rolled plate (HR), Cold rolled Plate (CR), 2B, 2D, BA NO(8),
SATIN (Met with Plastic Coated) |
| Incoloy 800 Plate Stock in form of | Alloy 800 Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim
Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling
Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled,
annealed, soft annealed, descaled, sheared, tread plate, Checker
Plate |
| High Quality Incoloy 800 Plate | Huge Stock, Timely delivery Raw Materials Certificate EN 10204/3.1B 100% Radiography Test Report High special strength, high melt point Third Party Inspection Report, etc Excellent corrosive resistance, good thermal resistance Customer support after-sales service Strict Control from Raw Material to Finished Incoloy 800 plate |
| Incoloy 800 profiling | To provide a full profiling service we use numerous profiling
methods including: Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
| Specialized in | Incoloy 800 Sheet: material under 3/16" [5.00 mm] in thickness and
24" [600 mm] and over in width Incoloy 800 Plate: material 3/16" [5.00 mm] and over in thickness
and over 10" [250 mm] in width Incoloy 800 Strip: cold-rolled material under 3/16" [5.00 mm] in
thickness and under 24" [600 mm] in width Incoloy 800 Clad plate: Incoloy 800 Clad plate is a composite steel
plate made by bonding Incoloy 800 plate, etc. Free Quote, Inquiry answered within 24 hours |
| Steel Tubes China offer a comprehensive services designed to add
value to your project: plasma cutting, waterjet cutting, laser
cutting, bending and mechanical processing, edge preparation,
welding, sawing and shearing. |
5. AMS 5871, UNS N08800 Alloy 800/H/HT Sheet & Plate Stock List
| Alloy | Product form | Dimension |
| INCOLOY 800HT (32 Ni/21 Cr) | Sheet; cold rolled, annealed | 1.0x1220 mm x coil, 9.9 kg/m |
| INCOLOY 800H/HT (32 Ni/21 Cr) | Sheet; cold rolled, annealed, pickled | 3.0x1200x3000 mm, 85.8 kg/pc |
| ALLOY 800H (32 Ni/21 Cr) | Sheet; cold rolled, solution annealed | 3.0x1500x3000 mm, 109 kg/pc |
| ALLOY 800H/HT (32 Ni/21 Cr) | Plate; hot rolled, solution annealed, descaled, sheared | 4.0x1200x3000 mm, 118 kg/pc |
| ALLOY 800H/HT (32 Ni/21 Cr) | Plate; hot rolled, solution annealed, descaled, sheared | 5.0x2000x6000 mm, 530 kg/pc |
| ALLOY 800HT (32 Ni/21 Cr) | Plate; hot rolled, sol annealed, descaled, sheared | 6.0x2000x6000 mm, 590 kg/pc |
| ALLOY 800H/HT (32 Ni/21 Cr) | Plate; hot rolled, solution annealed, descaled, sheared | 12.0x2000x3000 mm, 576 kg/pc |
| INCOLOY 800H/HT (32 Ni/21Cr) | Plate; hot rolled, annealed, descaled | 15.0x2400x3000 mm, 884 kg/pc |
6. Difference between Incoloy 800 Sheet, Plate & Foil
Here are few points to recognised sheet, plate or foil:
If thickness greater than 6.35 mm is called a Incoloy 800 Plate.
If thickness greater than 0.15 mm and less than 6.35mm is called a
Incoloy 800 Sheet.
If thickness less than 0.15mm is then its a Incoloy 800 Foil.
Incoloy 800 Plate Properties
Incoloy 800/800H/800HT Plate, Sheet & Coil Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 800 | 0.10 max | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800H | 0.05 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800HT | 0.06 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60ᴬ | 0.15 – 0.60ᴬ |
Alloy 800/800H/800HT Sheets, Plates & Coils Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 800 / 800H / 800HT | 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa – 205 | 30 % |
Equivalent Grades for 800/800H/800HT Incoloy Sheet & Plate
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 800 | 1.4876 | N08800 | NCF 800 | NA 15 | ЭИ670 | Z8NC32-21 | X10NiCrAlTi32-20 | XH32T |
| Incoloy 800H | 1.4958 / 1.4876 | N08810 | NCF 800H | NA 15(H) | ЭИ670 | Z8NC33-21 | X5NiCrAlTi31-20 | XH32T |
| Incoloy 800HT | 1.4859 / 1.4876 | N08811 | NCF 800HT | NA 15(HT) | ЭИ670 | – | X8NiCrAlTi32-21 | XH32T |
ASTM Product Specifications
| Specification | Title |
| ASTM B409 | Nickel Iron Chromium Alloy 800 Sheet, Plate and Strip |
