317L Duplex Stainless Steel Fasteners Heavy Hex Nut 1/4"-4" ASME B
18.2.2
1.317L description
317L has excellent corrosion resistance in a wide range of
chemicals, especially in acidic chloride
environments such as those encountered in pulp and paper mills.
Increased levels of chromium,
nickel and molybdenum compared to 316L stainless steel improve
resistance to chloride pitting
and general corrosion. Resistance increases with molybdenum alloy
content. 317L is resistant to
sulfuric acid concentrations up to 5 percent at temperatures as
high as 120°F (49°C). At
temperatures under 100°F (38°C) this alloy has excellent resistance
to solutions of higher
concentration. However, service tests are recommended to account
for the affects of specific
operating conditions that may affect corrosion behavior. In
processes where condensation of
sulfur-bearing gases occurs, 317L is much more resistant to attack
at the point of condensation
than conventional alloy 316. The acid concentration has a marked
influence on the rate of attack
in such environments and should be carefully determined by service
tests.
What are the characteristics of 317L Stainless?
· Improved general and localized corrosion to 316L stainless
· Good formability
· Good weldability
2. Fasteners Specification:
3.Fasteners package method
Often small hardware, fasteners and other parts are packaged in
bags and displayed in bins or on
hangers. Bagging is the most effective way to package and organize small
parts, while also being the
most flexible and affordable. In order to better protect the products during transportation, we
will pack the
packed products in wooden cases.
4.Fasteners Application
A fastener (US English) or fastening (UK English) is a hardware
device that mechanically joins or affixes
two or more objects together. In general, fasteners are used to create
non-permanent joints; that is, joints
that can be removed or dismantled without damaging the joining
components. Welding is an example of
creating permanent joints. Steel fasteners are usually made of stainless
steel, carbon steel, or alloy steel.
5.Chemical Composition, %
| Ni | Cr | Mo | Mn | Si | C | N | S | P | Fe |
|---|
| 11.0 - 15.0 | 18.0 - 20.0 | 3.0 - 4.0 | 2.0 Max | .75 Max | 0.03 Max | 0.1 Max | 0.03 Max | 0.045 Max | Balance |
6.Delivery:
Port:
Tianjin/Shanghai/Ningbo
Lead Time :
| Quantity(Pieces) | 1 - 100 | >100 |
| Est. Time(days) | 10 | To be negotiated
|
7.Production Flow
From the raw materials to the finished products, we can satisfy
customers' requirements by high quality
products and best services by means of scientific and reasonable
layout of the plant, advanced automatic
manufacturing equipment and digital management.
Workshop
From raw materials to end product delivery, it has a strict control
program. Accurate completion is done
about Standard parts: wiring- roughing – annealing- pickling -
drawing – heading(cold forging or hot forging)
– threading(rolling) - heat treatment -surface treatment –cleaning
–inspecting-packaging
Customization parts:heading, stamping or casting-wire cut edm
machine -CNC (machining center) -grinder
threading(rolling) - heat treatment -surface treatment –cleaning
–inspecting-packaging.
