Home > Inconel Pipe >

Cold Drawn Inconel Pipe SMLS ASTM B407 UNS N08800 Incoloy 800 Pipe And Tube

Product Categories

Hastelloy Pipe [58]
Inconel Pipe [40]
Nickel Alloy Pipe [43]
Nickel Alloy Flanges [155]
Nickel Alloy Fasteners [106]
Alloy Round Bar [65]
Duplex Stainless Steel Pipe [24]
Hastelloy Plate [25]
Alloy Steel Pipe [14]
Nickel Alloy Plate [31]
Stainless Steel Plate [31]
Carbon Steel Flange [16]
Inconel Round Bar [21]
Stainless Steel Round Bar [24]
Alloy Pipe Fittings [121]
Duplex Stainless Steel Pipe Fittings [100]
Duplex Stainless Steel Flanges [86]
Duplex Stainless Steel Fasteners [93]
stainless steel pipe fitting [21]
Carbon Steel Pipe Fitting [17]

Zhengzhou Huitong Pipeline Equipment Co.,Ltd.

Contact Now

Cold Drawn Inconel Pipe SMLS ASTM B407 UNS N08800 Incoloy 800 Pipe And Tube

Ask Lasest Price
Brand Name :	HT
Model Number :	ASTM B407 UNS N08800 Incoloy800 STEEL PIPES & TUBES
Certification :	ISO9001
Price :	30 USD/KG
Payment Terms :	L/C,T/T, Western Union
Supply Ability :	10ton per month
Delivery Time :	30-35 working days

Add to Cart

Product Details
Company Profile

Cold Drawn Inconel Pipe SMLS ASTM B407 UNS N08800 Incoloy 800 Pipe And Tube

Cold Drawn SMLS ASTM B407 UNS N08800 Incoloy800 Pipe and Tube

1.What Is The Difference Between Pipe and Tube?

You have probably heard pipe and tube used interchangeably but are they different. The answer to that question is yes! The biggest difference between pipe and tube is there shape. Pipe will always be round however tube can be round, square or rectangular. Below are several other factors that make pipe and tube different.

Pipe

When it comes to measurement of pipe, it is measure by the inside diameter, often called the nominal diameter. Nominal Pipe Size (NPS) is a North American set of standard sizes for pipe. The term nominal refers to pipe in non-specific terms and identifies the inside diameter with a non-dimensional number. For example, a 2-inch nominal steel pipe consists of a family of steel pipe with a 2.375″ diameter.

Pipe also has a wall thickness which is referred to by its schedule. The outside of the pipe is always larger than the inside. The difference between the inside diameter (ID) and the outside diameter (OD) is due to the thickness of the wall. Wall thickness also determines the strength of the pipe. Schedule 40 pipe is the most common, however when extra strength is required schedule 80 is available.

Tube

Round tubing is specified by its actual outside diameter and is equal to the corresponding size. The thickness of tube is defined by a gauge number. Tube size will keep the same OD no matter what the wall thickness is. Tubing also has a tighter manufacturing tolerances than pipe.

2. ASTM B163 B407 ASME SB163 SB407 N08811 Nickel Alloy Seamless Tubes Pipes Incoloy 800HT Seamless Tubing Chemical composition:

Alloy	%	Ni	Cr	Fe	C	Mn	Si	Cu	S	Al	Ti
UNS N08800	Min.	30	19							0.15	0.15
UNS N08800	Max.	35	23	balance	0.10	1.5	1	0.75	0.015	0.60	0.60
UNS N08810	Min.	30	19		0.05					0.15	0.15
UNS N08810	Max.	35	23	balance	0.10	1.5	1	0.75	0.015	0.60	0.60
UNS N08811	Min.	30	19		0.06					0.15	0.15
	Max.	35	23	balance	0.10	1.5	1	0.75	0.015	0.60	0.60
	AI+Ti: 0.85-1.20

3.ASTM B163 B407 ASME SB163 SB407 N08811 EN 10216-5 1.4959 1.4876 Nickel Alloy Seamless Tube Pipe Incoloy 800HT Seamless Tubing is an austenitic nickel-iron-chromium alloy Characteristic as below:

Excellent corrosion resistance in the water media of the extremely high temperature of 500℃.
Good stress corrosion resistance
Good machining
High creep strength
Very good resistance to oxidation
Good resistance to combustion gases
Very good resistance to carburization
Good resistance to nitrogen absorption
Good structural stability at high temperatures
Good weldability

4.Inconel Seamles Tubes Surface Finish

Surface Finish		Internal Surface(ID)		Exterbal Surface(OD)
		Roughness Average(RA)		Roughness Average(RA)
		μ inch	μm	μ inch	μm
EP	Electro Polish	15,10,7,5	0.38,0.25,0.20;0.13	32	0.8
AP	Annealed & Pickled	Not defined	Not defined	40 or Not defined	1.0 or Not defined
MP	Mechanical Polish	40,32,25,20	1.0,0.8,0.6,0.5	32	0.8
BA	Beight Annealed	40,32,25,20	1.0,0.8,0.6,0.5	32	0.8

5.Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni	Cr	Al	Ti
Alloy 800	0.10 max	1.50 max	1.00 max	0.015 max	0.75 max	39.50 min	30.00 – 35.00	19.00 – 23.00	0.15 – 0.60	0.15 – 0.60
Alloy 800H	0.05 – 0.10	1.50 max	1.00 max	0.015 max	0.75 max	39.50 min	30.00 – 35.00	19.00 – 23.00	0.15 – 0.60	0.15 – 0.60
Alloy 800HT	0.06 – 0.10	1.50 max	1.00 max	0.015 max	0.75 max	39.50 min	30.00 – 35.00	19.00 – 23.00	0.15 – 0.60	0.15 – 0.60

6.MECHANICAL PROPERTIES

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Incoloy 800 / 800H / 800HT	7.94 g/cm3	1385 °C (2525 °F)	Psi – 75,000 , MPa – 520	Psi – 30,000 , MPa – 205	30 %

Product Tags:


*From:	Your email address is incorrect!
*To:	Zhengzhou Huitong Pipeline Equipment Co.,Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!